PS2N ISSUE(S)
-
- Level 2: My Street Resident
- Posts: 14
- Joined: Mon Jan 13, 2014 6:13 am
- Xlink Kai Setup?: no
- Xlink Kai username: dj3q0t32tegb
- Location: Genocide, Germany
Re: PS2N ISSUE(S)
Ok I tried to connect using the automatic settings and it keeps failing. I first tried using my crossover cable. I then tried using my standard cat 5e cable and it still failed. Should I de-bridge my connection now and then try? If that fails, I'm going to connect the cable to my router. I hope I don't need to port forward because I don't know where to get the information.
-
- Level 2: My Street Resident
- Posts: 14
- Joined: Mon Jan 13, 2014 6:13 am
- Xlink Kai Setup?: no
- Xlink Kai username: dj3q0t32tegb
- Location: Genocide, Germany
Re: PS2N ISSUE(S)
I can't seem to connect using the automatic settings. I de-bridged my laptop connection and switched the crossover cable to the standard cat 5e cable but I still couldn't connect using the automatic settings. Only the manual settings are letting me connect so far. I may need to do some port forwarding but I don't know if there are ports for PS2 games that need to be open. My last resort so far is to just connect the standard 100ft cat 5e cable through my PS2 and router itself in my living room. I'm not giving up on trying to get my connection working because I want to play COD multiplayer so bad. Thanks Mytho.
-
- Level 41: Can't Think of More Ranks...Time to Split!
- Posts: 493
- Joined: Wed Aug 18, 2010 10:55 pm
- Xlink Kai Setup?: yes
- Xlink Kai username: LjariusSneed580
- Location: On the Homefront
- Contact:
Re: PS2N ISSUE(S)
Just for fun, I just tried configuring a bridged connection on a laptop I have lying around and was able to successfully connect without any issues using the automatic settings. The only other issue I can think of is that maybe your router can't allocate a LAN IP address to your PS2. You would have to check and see if your router is assigning a LAN IP address to your PS2.
If you can, just use the 100ft CAT5e cable for now and see if that will work.
If you can, just use the 100ft CAT5e cable for now and see if that will work.
![](http://img.photobucket.com/albums/v660/Mytho/playitloud.png)
Let Battlefield 2: Modern Combat go!
-
- Level 2: My Street Resident
- Posts: 14
- Joined: Mon Jan 13, 2014 6:13 am
- Xlink Kai Setup?: no
- Xlink Kai username: dj3q0t32tegb
- Location: Genocide, Germany
Re: PS2N ISSUE(S)
Did you bridge the Ethernet and Wi-Fi? Because those are the only two choices I have to bridge. I can't do anything with the Broadband Connecton [WAN Miniport (PPPOE)]. I'll tell you what I'm seeing on my Network Settings in Control Panel. The Wi-Fi IP is different now. The last digit is up one. And the Ethernet is displaying a totally diferent IP and Subnet Mask. Is that normal? Do you know how I can check to see if my router is assigning a LAN IP to my PS2? Thanks for your assistance Mytho. I haven't connected my standard cat 5e cable to my router yet, but when I do, do I plug it into the WAN or LAN?
-
- Level 41: Can't Think of More Ranks...Time to Split!
- Posts: 683
- Joined: Mon Jul 09, 2012 12:35 am
- Xlink Kai Setup?: yes
Re: PS2N ISSUE(S)
I don't know about The Bridging stuff but If you connect the standard Cat 5e cable directly to the router you have to connect it to the LAN I am 99% sure about that however If I am wrong I am sure Mytho will correct me I Hope this helps and you are able to get connected and enjoy some Multiplayer Gaming.stevenklipt_U wrote:Did you bridge the Ethernet and Wi-Fi? Because those are the only two choices I have to bridge. I can't do anything with the Broadband Connecton [WAN Miniport (PPPOE)]. I'll tell you what I'm seeing on my Network Settings in Control Panel. The Wi-Fi IP is different now. The last digit is up one. And the Ethernet is displaying a totally diferent IP and Subnet Mask. Is that normal? Do you know how I can check to see if my router is assigning a LAN IP to my PS2? Thanks for your assistance Mytho. I haven't connected my standard cat 5e cable to my router yet, but when I do, do I plug it into the WAN or LAN?
![Smile :)](./images/smilies/icon_e_smile.gif)
-
- Level 41: Can't Think of More Ranks...Time to Split!
- Posts: 493
- Joined: Wed Aug 18, 2010 10:55 pm
- Xlink Kai Setup?: yes
- Xlink Kai username: LjariusSneed580
- Location: On the Homefront
- Contact:
Re: PS2N ISSUE(S)
When you set your router up, did you have to select PPPoE and enter a user name and password? When I bridged my connection last night, it worked automatically and said nothing about PPPoE. If you don't know how to access your router, let me know the make and model number and I can help you.stevenklipt_U wrote:Did you bridge the Ethernet and Wi-Fi? Because those are the only two choices I have to bridge. I can't do anything with the Broadband Connecton [WAN Miniport (PPPOE)]. I'll tell you what I'm seeing on my Network Settings in Control Panel. The Wi-Fi IP is different now. The last digit is up one. And the Ethernet is displaying a totally diferent IP and Subnet Mask. Is that normal? Do you know how I can check to see if my router is assigning a LAN IP to my PS2? Thanks for your assistance Mytho. I haven't connected my standard cat 5e cable to my router yet, but when I do, do I plug it into the WAN or LAN?
As for whether or not your router is assigning a LAN IP to your PS2, you would have to check your router's client list when you enable the bridge connection. The IP should look almost identical to your laptop's LAN IP, except the last number should be incremented by one.
chak88 is correct regarding how to connect the CAT5e cable. On your router, there should be 4 Ethernet ports in a row. Plug your CAT5e cable into one of those ports and you should be good to go.
![](http://img.photobucket.com/albums/v660/Mytho/playitloud.png)
Let Battlefield 2: Modern Combat go!
-
- Level 2: My Street Resident
- Posts: 14
- Joined: Mon Jan 13, 2014 6:13 am
- Xlink Kai Setup?: no
- Xlink Kai username: dj3q0t32tegb
- Location: Genocide, Germany
Re: PS2N ISSUE(S)
Alright, thanks man for trying to help me. Hopefully we can play online if we have some games in common.chak88 wrote:I don't know about The Bridging stuff but If you connect the standard Cat 5e cable directly to the router you have to connect it to the LAN I am 99% sure about that however If I am wrong I am sure Mytho will correct me I Hope this helps and you are able to get connected and enjoy some Multiplayer Gaming.stevenklipt_U wrote:Did you bridge the Ethernet and Wi-Fi? Because those are the only two choices I have to bridge. I can't do anything with the Broadband Connecton [WAN Miniport (PPPOE)]. I'll tell you what I'm seeing on my Network Settings in Control Panel. The Wi-Fi IP is different now. The last digit is up one. And the Ethernet is displaying a totally diferent IP and Subnet Mask. Is that normal? Do you know how I can check to see if my router is assigning a LAN IP to my PS2? Thanks for your assistance Mytho. I haven't connected my standard cat 5e cable to my router yet, but when I do, do I plug it into the WAN or LAN?
-
- Level 2: My Street Resident
- Posts: 14
- Joined: Mon Jan 13, 2014 6:13 am
- Xlink Kai Setup?: no
- Xlink Kai username: dj3q0t32tegb
- Location: Genocide, Germany
Re: PS2N ISSUE(S)
I wouldn't know if the router is PPPoE enabled as well as username and password assigned because I didn't set it up. I'll check with our service provider and ask them sometime. The router is Verizon (model MI424WR). I checked my LAN in Network Connections on my laptop and yes, the last number is up one because it is usually 192.168.1.8 and now displays 192.168.1.9. So I plug my Ethernet cable in a LAN port, not the WAN port on the main computer?Mytho wrote:When you set your router up, did you have to select PPPoE and enter a user name and password? When I bridged my connection last night, it worked automatically and said nothing about PPPoE. If you don't know how to access your router, let me know the make and model number and I can help you.stevenklipt_U wrote:Did you bridge the Ethernet and Wi-Fi? Because those are the only two choices I have to bridge. I can't do anything with the Broadband Connecton [WAN Miniport (PPPOE)]. I'll tell you what I'm seeing on my Network Settings in Control Panel. The Wi-Fi IP is different now. The last digit is up one. And the Ethernet is displaying a totally diferent IP and Subnet Mask. Is that normal? Do you know how I can check to see if my router is assigning a LAN IP to my PS2? Thanks for your assistance Mytho. I haven't connected my standard cat 5e cable to my router yet, but when I do, do I plug it into the WAN or LAN?
As for whether or not your router is assigning a LAN IP to your PS2, you would have to check your router's client list when you enable the bridge connection. The IP should look almost identical to your laptop's LAN IP, except the last number should be incremented by one.
chak88 is correct regarding how to connect the CAT5e cable. On your router, there should be 4 Ethernet ports in a row. Plug your CAT5e cable into one of those ports and you should be good to go.
-
- Level 41: Can't Think of More Ranks...Time to Split!
- Posts: 493
- Joined: Wed Aug 18, 2010 10:55 pm
- Xlink Kai Setup?: yes
- Xlink Kai username: LjariusSneed580
- Location: On the Homefront
- Contact:
Re: PS2N ISSUE(S)
Ah, gotcha on the router. To really get to the bottom of this, you would need to access your router from a browser and take a look at the settings.stevenklipt_U wrote:I wouldn't know if the router is PPPoE enabled as well as username and password assigned because I didn't set it up. I'll check with our service provider and ask them sometime. The router is Verizon (model MI424WR). I checked my LAN in Network Connections on my laptop and yes, the last number is up one because it is usually 192.168.1.8 and now displays 192.168.1.9. So I plug my Ethernet cable in a LAN port, not the WAN port on the main computer?
That's correct regarding the Ethernet cable. You need to plug the cable into one of the four yellow ports on your router.
![](http://img.photobucket.com/albums/v660/Mytho/playitloud.png)
Let Battlefield 2: Modern Combat go!
-
- Level 2: My Street Resident
- Posts: 14
- Joined: Mon Jan 13, 2014 6:13 am
- Xlink Kai Setup?: no
- Xlink Kai username: dj3q0t32tegb
- Location: Genocide, Germany
Re: PS2N ISSUE(S)
Do you know how to access the router?