Console failed to configure
-
- Level 3: The Not Very Fast and the Perturbed
- Posts: 26
- Joined: Wed Sep 01, 2010 10:54 pm
- Xlink Kai Setup?: no
- Xlink Kai username: IceCheat
- Location: England
Console failed to configure
I've figured out why I can't join games, according to Kia's diagnostics my console failed to configure. Fair enough, so I've checked the trouble shooting advise which gave me this:
Result
This message appears for Playstation 2 and Gamecube owners when you assign your device its IP via DHCP (automatically). Kai has its own inbuilt DHCP engine which it tries to issue your console with, and it fails to do so because another DHCP server exists on your network (usually a router).
There are 3 things you can do to solve the problem:
• Disable DHCP and set static IP's for your computers and consoles. You can have a look at this guide on how to do this in Windows XP.
• Block the MAC address of your console in your router so that it does not get assigned an IP by the router's DHCP server. Seek router / manufacturer documenation on whether you can do this with your particular router.
• Set the DHCP scope on the router so that it only assigns enough IP's for your PC's. Seek router / manufacturer documenation on whether you can do this with your particular router.
If the problem persists, we suggest you get some one-on-one support from here on in, so please fill in a Help Request form on the Official XLink Forums and post it into the Help Requests forum. A Team XLink moderator / administrator will try to respond as soon as possible, but no guarantees are made. To read about the Help Request System, please click here.
The only thing is I really have no idea how to do any of these things it suggests, would someone please tell me how to go about one of these? Prefebly a way that doesn't affect other users of this router.
Bear in mind I'm trying to use a PS3.
Result
This message appears for Playstation 2 and Gamecube owners when you assign your device its IP via DHCP (automatically). Kai has its own inbuilt DHCP engine which it tries to issue your console with, and it fails to do so because another DHCP server exists on your network (usually a router).
There are 3 things you can do to solve the problem:
• Disable DHCP and set static IP's for your computers and consoles. You can have a look at this guide on how to do this in Windows XP.
• Block the MAC address of your console in your router so that it does not get assigned an IP by the router's DHCP server. Seek router / manufacturer documenation on whether you can do this with your particular router.
• Set the DHCP scope on the router so that it only assigns enough IP's for your PC's. Seek router / manufacturer documenation on whether you can do this with your particular router.
If the problem persists, we suggest you get some one-on-one support from here on in, so please fill in a Help Request form on the Official XLink Forums and post it into the Help Requests forum. A Team XLink moderator / administrator will try to respond as soon as possible, but no guarantees are made. To read about the Help Request System, please click here.
The only thing is I really have no idea how to do any of these things it suggests, would someone please tell me how to go about one of these? Prefebly a way that doesn't affect other users of this router.
Bear in mind I'm trying to use a PS3.
(gmt+1)
Currently at GMT+1, returning to GMT±0 when daylight servings change.
Currently at GMT+1, returning to GMT±0 when daylight servings change.
Re: Console failed to configure
Ok how are you set up currently for Xlink? Do you use a manual IP or a DHCP IP?
-
- Level 3: The Not Very Fast and the Perturbed
- Posts: 26
- Joined: Wed Sep 01, 2010 10:54 pm
- Xlink Kai Setup?: no
- Xlink Kai username: IceCheat
- Location: England
Re: Console failed to configure
I don't manual set one so DHCP IP I guess. Looking back over my post, that is what the problem is so the alternative is a manual IP, right?
It is possible to give my PS3 a manual IP in its network configuration, I could do that but I have no idea what to put there.
OFFTOPIC: Looking at both my posts on the same page I've noticed one clock is about a second slower than the other. Dang, it's stopped doing it. Wait, it's doing it again. This is becoming circular.
It is possible to give my PS3 a manual IP in its network configuration, I could do that but I have no idea what to put there.
OFFTOPIC: Looking at both my posts on the same page I've noticed one clock is about a second slower than the other. Dang, it's stopped doing it. Wait, it's doing it again. This is becoming circular.
(gmt+1)
Currently at GMT+1, returning to GMT±0 when daylight servings change.
Currently at GMT+1, returning to GMT±0 when daylight servings change.
Re: Console failed to configure
This is from OC: # Boot up your PS2, and find the consoles MAC Address. This can be accessed by pressing Triangle at the main screen of your PS2 to view version information.
# Use your MAC address at this URL to generate an IP address: http://www.teamxlink.co.uk/ps2assign.php
# Create a new network setting on your PS2, and call it "xlink" or something similar.
# This will be a Static/Manual configuration. Use the following:
Console IP: (use the IP that you generated from the URL above)
Subnet Mask: 255.255.0.0
Router IP/Gateway: 192.168.0.1
DNS: Automatic
Does the PS3 use the same configuration for PS2 games or is there a separate ps2 game network config?
# Use your MAC address at this URL to generate an IP address: http://www.teamxlink.co.uk/ps2assign.php
# Create a new network setting on your PS2, and call it "xlink" or something similar.
# This will be a Static/Manual configuration. Use the following:
Console IP: (use the IP that you generated from the URL above)
Subnet Mask: 255.255.0.0
Router IP/Gateway: 192.168.0.1
DNS: Automatic
Does the PS3 use the same configuration for PS2 games or is there a separate ps2 game network config?
-
- Level 6: Respectful Citizen Golf 2
- Posts: 54
- Joined: Wed Sep 01, 2010 6:13 pm
- Xlink Kai Setup?: yes
- Xlink Kai username: SHARKGUN
Re: Console failed to configure
That didn't work on my PS2 in the first place.Favrenation wrote:# Boot up your PS2, and find the consoles MAC Address. This can be accessed by pressing Triangle at the main screen of your PS2 to view version information
The basics:
- you have to know your Router Password to access its web interface
- Look for the DHCP scope and choose an IP that isn't part of the DHCP scope
- Go to the PS3 config and manually set the IP to the one you've chosen.
- Subnetmask is 255.255.255.0 as default value
- Default Gateway is your Router's IP
- Create a PS2 Network Config File on the PS3's internal virtual memory card if you haven't done that yet
- if your OS is Vista/Win7 go into the properties of the XLink files and enable "Run as administrator" and activate the Compatibility Mode "XP Service Pack 2".
(gmt+1)
Re: Console failed to configure
I dont know what your talking about. All I did was create a bridge then use my Ethernet adaptor for xlink and then create the xlink network con-fig with PS2's Mac address. No need to use your router. Then just plug ps2 into your computers Ethernet port and connect when xlink is up and it should detect your console.
-
- site admin
- Posts: 1766
- Joined: Wed Aug 18, 2010 9:23 pm
- Xlink Kai Setup?: yes
- Xlink Kai username: lazyhobobum
- Location: west coast usa
- Contact:
Re: Console failed to configure
Wait so Pike Fodder, first of all how are you setup. Are you using wireless for anything? Like is your PC connected to your router with an ethernet cord and your ps2 is connected to the router with an ethernet cord?
Also, you should be able to use an auto network configuration for the playstation 2 in most cases.
Also, you should be able to use an auto network configuration for the playstation 2 in most cases.
-
- Level 6: Respectful Citizen Golf 2
- Posts: 54
- Joined: Wed Sep 01, 2010 6:13 pm
- Xlink Kai Setup?: yes
- Xlink Kai username: SHARKGUN
Re: Console failed to configure
If the XLink connection can't be established one has to make use of portforwarding which needs a static ip.Favrenation wrote:I dont know what your talking about. All I did was create a bridge then use my Ethernet adaptor for xlink and then create the xlink network con-fig with PS2's Mac address. No need to use your router. Then just plug ps2 into your computers Ethernet port and connect when xlink is up and it should detect your console.
(gmt+1)
Re: Console failed to configure
Ik but that is different then getting your ps2 to be configured seperatley.
-
- site admin
- Posts: 1766
- Joined: Wed Aug 18, 2010 9:23 pm
- Xlink Kai Setup?: yes
- Xlink Kai username: lazyhobobum
- Location: west coast usa
- Contact:
Re: Console failed to configure
HOLD UP
Before we get Pike Fodder all confused we need to find out the basic way he is setting up everything, meaning if he is using wireless or wires to do this.
If he is trying to use wireless internet from his router to pc things will be a lot more complicated to setup. If you are using wireless from your router to PS3, things will be even worse to setup.
So PikeFodder when you find this thread again, please elaborate on how you have everything hooked up. If you are using wireless to connect your router to the PC or PS3, or if you are using ethernet cords from router to your PC and to your PS3.
Before we get Pike Fodder all confused we need to find out the basic way he is setting up everything, meaning if he is using wireless or wires to do this.
If he is trying to use wireless internet from his router to pc things will be a lot more complicated to setup. If you are using wireless from your router to PS3, things will be even worse to setup.
So PikeFodder when you find this thread again, please elaborate on how you have everything hooked up. If you are using wireless to connect your router to the PC or PS3, or if you are using ethernet cords from router to your PC and to your PS3.